EWHA WOMANS UNIVERSITY | Undergraduate/Graduate | Undergraduate | College of Medicine

Seok Chang Ryu Associate Professor

Department of Mechanical and Biomedical Engineering/College of Medicine/

Jinseonmi-gwan #311
02-3277-3558
Research Interests

Research Record

FEA Modeling of Soft Tissue Interaction for Active Needles With a Rotational Tip Joint IEEE ACCESS, 2022, v.10, 46291-46301
SCIE Scopus dColl.
Geometry evolution prediction and process settings influence in profiled ring rolling International Journal of Advanced Manufacturing Technology, 2022, v.122 no.2, 799-819
SCIE Scopus dColl.
Notch effect in 20% short carbon fibre-PA reinforced composites under quasi-static tensile loads Theoretical and Applied Fracture Mechanics, 2022, v.122, 103649
SCIE Scopus dColl.
Pinching Force Changes by Modulating the Interaction Gain Over the Fingertip IEEE Access, 2022, v.10, 9744-9749
SCIE Scopus dColl.
Quasi-ductile to brittle transitional behavior and material properties gradient for additively manufactured SLA acrylate Materials Letters, 2022, v.329, 133121
SCIE Scopus dColl.
포스트 코로나 시대 수술 로봇의 역할 및 발전 방향에 관한 전망 로봇학회 논문지, 2021, v.16 no.2, 172-178
KCI dColl.
Electrically-Evoked Proximity Sensation Can Enhance Fine Finger Control in Telerobotic Pinch Scientific Reports, 2020, v.10 no.1, 163
SCIE Scopus dColl.
An intraoperative test device for aortic valve repair JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY, 2019, v.157 no.1, 126-132
SCIE Scopus dColl.
Design of a Soft Composite Finger with Adjustable Joint Stiffness SOFT ROBOTICS, 2019, v.6 no.6, 722-732
SCIE Scopus dColl.
Neural Efficiency of Human-Robotic Feedback Modalities Under Stress Differs With Gender FRONTIERS IN HUMAN NEUROSCIENCE, 2019, v.13, 287
SCIE Scopus dColl.
Performance Evaluation of Optically Sensorized Tendons for Articulate Surgical Instruments JOURNAL OF MEDICAL DEVICES-TRANSACTIONS OF THE ASME, 2019, v.13 no.4, 44504
SCIE Scopus dColl.
Towards the design of mechanically superior tubular structures for microcatheters SMART MATERIALS AND STRUCTURES, 2019, v.28 no.3, 35032
SCIE Scopus dColl.
[학술지논문] FEA Modeling of Soft Tissue Interaction for Active Needles With a Rotational Tip Joint IEEE ACCESS, 2022, v.10 no.0 , 46291-46301
SCIE
[학술지논문] Pinching Force Changes by Modulating the Interaction Gain Over the Fingertip IEEE ACCESS, 2022, v.10 no.0 , 9744-9749
SCIE
[학술지논문] Quasi-ductile to brittle transitional behavior and material properties gradient for additively manufactured SLA acrylate MATERIALS LETTERS, 2022, v.329 no.0 , 0-0
SCI
[학술지논문] 포스트 코로나 시대 수술 로봇의 역할 및 발전 방향에 관한 전망 로봇학회 논문지, 2021, v.16 no.2 , 172-178
KCI
[학술지논문] Electrically-Evoked Proximity Sensation Can Enhance Fine Finger Control in Telerobotic Pinch SCIENTIFIC REPORTS, 2020, v.10 no.1 , 163-163
SCI
[학술지논문] An intraoperative test device for aortic valve repair JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY, 2019, v.157 no.1 , 126-132
SCI
[학술지논문] Design of a Soft Composite Finger with Adjustable Joint Stiffness SOFT ROBOTICS, 2019, v.6 no.6 , 722-732
SCIE
[학술지논문] Neural Efficiency of Human-Robotic Feedback Modalities Under Stress Differs With Gender FRONTIERS IN HUMAN NEUROSCIENCE, 2019, v.13 no.0 , 287-287
SCIE
[학술지논문] Performance Evaluation of Optically Sensorized Tendons for Articulate Surgical Instruments JOURNAL OF MEDICAL DEVICES-TRANSACTIONS OF THE ASME, 2019, v.13 no.4 , 044504-044504
SCIE
[학술지논문] Towards the design of mechanically superior tubular structures for microcatheters SMART MATERIALS AND STRUCTURES, 2019, v.28 no.3 , 035032-035032
SCI
[학술지논문] Design and Fabrication of Laser-Machined Hinge Joints on Miniature Tubes for Steerable Medical Devices JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 2018, v.10 no.1 , 011002-011002
SCIE
[학술지논문] Design and characterization of rounded reentrant honeycomb patterns for lightweight and rigid auxetic structures SMART MATERIALS AND STRUCTURES, 2017, v.26 no.11 , 115026-115026
SCI
[학술지논문] Design of an optically controlled MR-compatible active needle IEEE TRANSACTIONS ON ROBOTICS, 2014, v.31 no.1 , 1-11
SCI
[학술발표] Maximizing the resolution range of additive-manufactured miniature- scale force-sensing devices for biomedical applications 25th International Conference on Material Forming, 포르투갈, 2022-04-28 Key Engineering Materials, 2022, 159-167
[학술발표] A Computational Internal Model to Quantify the Effect of Sensorimotor Augmentation on Motor Output Annual International Conference of the IEEE Engineering in Medicine & Biology Society, 캐나다, Montreal, 2020-07-20 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society, 2020
[학술발표] Design and Fabrication of Transformable Head Structures for Endoscopic Catheters IEEE International Conference on Robotics and Automation, 캐나다, 2019-05-20 Proceedings of IEEE International Conference on Robotics and Automation, 2019
[학술발표] Feasibility Study of In Vivo Robotic Plasma Medicine Devices IEEE Symposium on Medical Robotics, 미국, 2019-04-04 Proceedings of International Symposium on Medical Robotics, 2019
[학술발표] Feasibility Study of Robotic Needles with a Rotational Tip-Joint and Notch Patterns IEEE International Conference on Robotics and Automation, 캐나다, 2019-05-20 Proceedings of International Conference on Robotics and Automation, 2019
[학술발표] Miniature Robotic Tubes with Rotational Tip-Joints as a Medical Delivery Platform IEEE International Conference on Robotics and Automation, 캐나다, 2019-05-20 Proceedings of International Conference on Robotics and Automation, 2019
[학술발표] On the Kinematic Model of Continuum Robots with Spatially Varying Nonlinear Stiffness IEEE International Symposium on Medical Robotics, 미국, 2019-04-05 Proceedings of International Symposium on Medical Robotics, 2019
[학술발표] Real-time adaptive kinematic model estimation of concentric tube robots IEEE/RSJ International Conference on Intelligent Robots and Systems, 독일, 2015-09-28 Proceedings of International Conference on Intelligent Robots and Systems, 2015
[학술발표] FBG-based shape sensing tubes for continuum robots IEEE International Conference on Robotics and Automation, 싱가폴, 2014-06-02 Proceedings of International Conference on Robotics and Automation, 2014
[지적재산권] 와이어 기반 조향 바늘 구동 장치 Domestic : Patent , Registration , 10-2629040, 2024
[지적재산권] Steerable biopsy needle with fiber-activated shape memory alloy Overseas : Patent , Registration
[지적재산권] 등록 가변 선단부 구조를 갖는 카테터 Domestic : Patent , Registration , 10-2235059, 2021
[지적재산권] Steerable biopsy needle Overseas : Patent , Registration
[지적재산권] 인대 고정용 골접합 나사 Domestic : Patent , Registration
[지적재산권] Surgical Cannulas and Related Methods Overseas : Patent , Application

2024-1st
- Mechanical and Biomedical Engineering Experiment Ⅰ 강의 계획서 상세보기
  - Subject No 38571Class No 01
  - 3Year ( 3Credit , 4.5Hour) Tue 5~7 (ENG )
- Mechanical and Biomedical Engineering Experiment Ⅰ 강의 계획서 상세보기
  - Subject No 38571Class No 02
  - 3Year ( 3Credit , 4.5Hour) Fri 5~7 (ENG )
- Capstone Project in Content Convergence Ⅰ
  - Subject No 38588Class No 01
  - 4Year ( 3Credit , 4.5Hour) Tue 8~9 (ESEA) , Thu 3~3 (CH)
- System Control Design
  - Subject No 38607Class No 01
  - 4Year ( 3Credit , 3Hour) Mon 6~6 (ENG ) , Wed 5~5 (151)
- Smart Factory Capstone Design
  - Subject No G18163Class No 01
  - Year ( 3Credit , 3Hour)
- Human-Robot Physical Interaction
  - Subject No G18166Class No 01
  - Year ( 3Credit , 3Hour) Thu 4~5 (ENG )
2023-2nd
- Dynamics 강의 계획서 상세보기
  - Subject No 38572Class No 01
  - 2Year ( 3Credit , 3Hour) Mon 3~3 (POSCO) , Wed 2~2 (152)
- Bio-robotics
  - Subject No 38596Class No 01
  - 3Year ( 3Credit , 3Hour) Tue 2~2 (ESEA) , Fri 3~3 (CH)
- Capstone Project in Convergence 강의 계획서 상세보기
  - Subject No 38606Class No 01
  - 4Year ( 3Credit , 4.5Hour) Mon 5~5 (ESEA) , Wed 6~7 (CH)
- Mechanical&Biomedical Engineering Self-Designed ProjectⅠ
  - Subject No 39254Class No 01
  - 4Year ( 3Credit
- Mechanical&Biomedical Engineering Self-Designed ProjectⅡ
  - Subject No 39255Class No 01
  - 4Year ( 3Credit
- Smart Factory Capstone Design
  - Subject No G18163Class No 01
  - Year ( 3Credit , 3Hour)
2023-1st
- Mechanical and Biomedical Engineering Experiment I 강의 계획서 상세보기
  - Subject No 38571Class No 01
  - 3Year ( 3Credit , 4.5Hour) Tue 5~7 (ENG )
- Mechanical and Biomedical Engineering Experiment I 강의 계획서 상세보기
  - Subject No 38571Class No 02
  - 3Year ( 3Credit , 4.5Hour) Fri 5~7 (ENG )
- Capstone Project in Content Convergence 강의 계획서 상세보기
  - Subject No 38588Class No 01
  - 4Year ( 3Credit , 4.5Hour) Mon 2~2 (ENG A) , Thu 2~3 (101)
- System Control Design
  - Subject No 38607Class No 01
  - 4Year ( 3Credit , 3Hour) Mon 6~6 (ESEA) , Wed 5~5 (CH)
- Advanced Robotics
  - Subject No G18132Class No 01
  - Year ( 3Credit , 3Hour) Fri 4~5 (ENG )
- Smart Factory Capstone Design
  - Subject No G18163Class No 01
  - Year ( 3Credit , 3Hour)
2022-2nd
- Dynamics
  - Subject No 38572Class No 01
  - 2Year ( 3Credit , 3Hour) Mon 2~2 (ESEA) , Thu 3~3 (CH)
- Bio-robotics
  - Subject No 38596Class No 01
  - 3Year ( 3Credit , 3Hour) Mon 3~3 (ESEA) , Wed 2~2 (CH)
- Graduate Seminar
  - Subject No G18190Class No 01
  - Year ( 1Credit , 1Hour) Wed 6~6 (ENG A-102)
2022-1st
- Design of Machine Element
  - Subject No 38581Class No 01
  - 4Year ( 3Credit , 3Hour) Tue 7~7 (ESEA) , Fri 6~6 (CH)
- Capstone Project in Content Convergence
  - Subject No 38588Class No 01
  - 4Year ( 3Credit , 4.5Hour) Mon 2~2 (ENG A) , Thu 2~3 (101)
- System Control Design
  - Subject No 38607Class No 01
  - 4Year ( 3Credit , 3Hour) Wed 3~3 (ESEA) , Fri 2~2 (CH)
- Co-op Mid-term Internship I
  - Subject No 38891Class No 01
  - Year ( 3Credit
- Co-op Mid-term Internship III
  - Subject No 38893Class No 01
  - Year ( 3Credit
- Human-Robot Physical Interaction
  - Subject No G18166Class No 01
  - Year ( 3Credit , 3Hour) Tue 4~5 (ESEA)
2021-2nd
- Dynamics
  - Subject No 38572Class No 01
  - 3Year ( 3Credit , 3Hour) Tue 3~3 , Thu 2~2
- Bio-robotics
  - Subject No 38596Class No 01
  - 3Year ( 3Credit , 3Hour) Tue 2~2 , Fri 3~3
- Capstone Project in Convergence
  - Subject No 38606Class No 01
  - 4Year ( 3Credit , 4.5Hour) Mon 3~3 , Wed 2~3
- Co-op Mid-term Internship I
  - Subject No 38891Class No 01
  - Year ( 3Credit
- Co-op Mid-term Internship II
  - Subject No 38892Class No 01
  - Year ( 3Credit
- Co-op Mid-term Internship III
  - Subject No 38893Class No 01
  - Year ( 3Credit
2021-1st
- Capstone Project in Content Convergence
  - Subject No 38588Class No 01
  - 4Year ( 3Credit , 4.5Hour) Mon 7~8 , Fri 3~3
- System Control Design
  - Subject No 38607Class No 01
  - 4Year ( 3Credit , 3Hour) Mon 6~6 (ESEA) , Wed 5~5 (CH)
- Co-op Mid-term Internship I
  - Subject No 38891Class No 01
  - Year ( 3Credit
- Co-op Mid-term Internship II
  - Subject No 38892Class No 01
  - Year ( 3Credit
- Advanced Robotics
  - Subject No G18132Class No 01
  - Year ( 3Credit , 3Hour) Thu 2~3 (ESEA)

Academic Background

Stanford University Ph.D.(기계공학과)

Stanford University M.S.(기계공학과)

Pohang Univ. of Science and Technology B.S.(기계공학과)

Work Experience

Texas A&M University 2015-08-31 ~ 2019-08-31

Harvard Medical School/Boston Children's Hospital 2013-02-15 ~ 2015-06-23

List

College of Medicine

Seok Chang Ryu Associate Professor

Research Record

Courses

Academic Background

Work Experience